Darkroom Essentials and Accessories

Our unique PaperFlasher can breathe new life into blocked up highlights, and put tone into blank white areas. Flashing paper with white light is an effective aid to bringing out stubborn highlight detail, and was never more easily done than with the PaperFlasher.

Our handy SafeTorches can be a life saver when you drop something in the dark, and the b+w version is very popular among lith printers for inspection during development.

The Waterproof Thermometer can even be used to stir your chemicals when mixing up!

If agitating film developing tanks bores you, take a look at the new Heiland TAS film processor, a versatile and reliable tool for accurate and consistent results.

See also the Densitometers page for these essential accessories for the serious monochrome photographer.

Accessories for our Timers and Exposure Meters.

Item Exc.VAT Inc.VAT IEC plug for additional enlarger or safelight £4.25 £4.99   Foot switch extension cable, 2m (6.5 feet) £4.25 £4.99   Foot switch extension cable, 3m (10 feet) £5.11 £6.00   Foot switch (included as standard with all our timers except the PaperFlasher) £8.08 £9.49   Connecting cable for DeVere Transtab units - allows direct connection to StopClock / Analyser £21.28 £25.00   Mains power supply for ZoneMaster and ProcessMaster, UK 3-pin plug £9.35 £10.99   Mains power supply for ZoneMaster and ProcessMaster, Euro 2-pin plug £9.35 £10.99

Mains power supplies for the ZoneMaster II and ProcessMaster

We can supply suitable ”battery eliminators” for the UK and European 2-pin (France, Germany etc) only. We regret we cannot supply units for the USA and other markets, but suitable units are usually available from electrical shops.

Required Specification for a mains power unit:
Output voltage 7.5v regulated, 9v, regulated, or 6v unregulated. Do not connect an unregulated supply of more than 6v as these units often output voltages of up to 50% more than the rated output. Voltages of 10v or more will damage the ZoneMaster and ProcessMaster.
Maximum current requirement is 100mA, so any unit capable of providing 100mA or more is suitable.
Output connector: 2.1mm centre pole positive.

Battery life for the ZoneMaster II is likely to be long enough to obviate the need for a power supply, especially if an Alkaline type is used.

Top of page

[Darkroom Home] [About RH Designs] [Timers] [Exposure Meters] [Accessories] [PaperFlasher] [SafeTorch] [Thermometer] [TAS Film Processor] [Densitometers] [Books and Videos] [Technical Support] [Ordering Information] [Contact Us] [Links]